SUS310S SUS314 Quenching Mesh Belt Heat Resistant Alloy Conveyor Belt for Heat Treatment Furnace

This upgraded SUS314 high silicon alloy mesh belt is specially developed for long-term uninterrupted carburizing and quenching production lines with severe oxidation environment. Compared with SUS310S, SUS314 contains higher silicon element, forming dense anti-oxidation protective film under high temperature, effectively slowing mesh scaling and embrittlement.

It bears repeated hot-cold quenching cycles and continuous carburizing atmosphere erosion at the same time, suitable for large-scale auto parts 24-hour mass quenching production, greatly reducing frequent mesh belt replacement downtime for factories.

High silicon SUS314 alloy generates compact anti-oxidation silica film under high temperature operation, isolating furnace atmosphere corrosion and slowing wire oxidation scaling. The alloy matrix maintains stable mechanical strength under repeated thermal shock of quenching process, realizing long-term continuous operation without frequent replacement.

1. High Silicon SUS314 Alloy Raw Material Higher silicon content forms dense anti-oxidation film at high temperature, slow scaling and oxidation speed.

2. Superior Anti-Oxidation In Carburizing Atmosphere Outperform SUS310S in long-time carburizing furnace environment, avoid mesh brittle failure.

3. Extended Service Life For 24h Continuous Production Service life increased by 45% compared with SUS310S mesh belt under full-load quenching & carburizing conditions.

4. Strong Thermal Shock Resistance For Quenching Cycle Adapt to frequent rapid heating and water cooling alternation without crack or breakage.

1. Automotive parts 24-hour continuous carburizing & quenching line
2. Large hardware factory uninterrupted hardening heat treatment equipment
3. High-temperature oxidizing atmosphere mesh belt furnace
4. Mass production fastener automatic quenching production line

1. Main Material: SUS314 high silicon heat-resistant stainless steel alloy

2. Comparison Material: SUS310S for reference

3. Anti-Oxidation Performance: 45% higher than SUS310S under carburizing atmosphere

4. Max Long-Term Working Temp: 1100℃

5. Applicable Process: Continuous carburizing + quenching integrated line

Q1: What’s the core advantage of SUS314 mesh belt over SUS310S?

A: SUS314 has higher silicon content, better anti-oxidation and anti-carburization performance, longer service life for 24h continuous carburizing quenching production.

Q2: Is SUS314 mesh belt suitable for short-term intermittent small batch production?

A: SUS310S is more cost-effective for discontinuous small batch lines; SUS314 is recommended for large-volume non-stop mass production.